Delay cable crimping instructions

LEMO connector

1. Put black bending protection and crimp tube over cable
2. Remove black insulation by 18mm
3. Cut shield by 12 mm
4. Remove insulation from inner conductor by 5 mm
5. Unscrew connector (Attention: don't loose inner white tube)
6. Solder inner conductor to cable
7. Crimp shield to connector with LEMO crimp tool
8. Screw connector with inner white tube
9. Push bending protection on connector

BNC connector

1. Put black bending protection and crimp tube over cable
2. Remove black insulation by 15 mm
3. Cut shield by 6 mm
4. Remove insulation from inner conductor by 4 mm
5. Crimp inner conductor on cable (Suhner Crimp Tool, available from Mr. Schöps)
6. Put connector between white insulation and wire shield. It has to snap in, you hear a click
7. Crimp shield to connector with LEMO crimp tool
8. Push bending protection on connector