,,,,
"Test Results for the Thermal Sensors (To, T1, T2, T3, T4)",,,,
"Date: 15 Jun 2005",,,,
,,,,
"Tested with applied voltage of 12.09 VDC and measured the current.",,,,
"These tests were performed twice,  and the results stayed the same.",,,,
"Sensors give 1 microamp / K, so we should see about 300 microamps for a good sensor.",,,,
,,,,
"Thermal Sensor","Location","Location Description","Inside Crystal (Female pins*)","Outside Crystal (Male pins*)"
"T0","B83","Bottom","0 A","0 A"
"T1","B87","Beam Left","0 A","0 A"
"T2","B88","Top","298.7 microAmps","0 A"
"T3","B82","Beam Right","0 A","0 A"
"T4","C118","Top / Upstream","298.7 microAmps","297.5 microAmps"
,,,,
,,,,
,,,,
"* These are the pins on the connectors on the sphere, not on the test connector.",,,,
,,,,
"Note: The LEMO connectors come in sizes ""Grosse 0, 1, and 2.",,,,
"These use Grosse 0, Isolator mit 4 kontakte ",,,,
"In the magazin at PSI they are listed in book 44.0021",,,,